Rockwell Automation 1772-LV Mini-PLC - 2/15 Programmable Controller (Series B) Programming and Operations User Manual
Page 188

Quick Reference Section
Appendix A
AĆ19
Table A.M
Search Functions
Function
Key Sequence
Mode
Description
Locate first rung of
program
[SEARCH] [
↑
]
Any
Positions cursor on the first instruction of the
program.
Locate last rung or
program area
[SEARCH] [
↓
]
Any
Positions cursor on the temporary end
instruction,subroutine area boundary, or the end
statement depending on the cursor's location.
Press key sequence again to move to the next
boundary.
Locate first instruction of
current rung
[SEARCH] [
←
]
Program
Position cursor on first instruction of the current
rung.
Move cursor off screen
[SEARCH] [
→
]
Test,Run or
Run/Program
Moves cursor off screen to left.
Locate output instruction
of current rung
[SEARCH] [
→
]
Any
Positions cursor on the output instruction of the
current rung.
Locate rung without an
output instruction
[SHIFT]
[SEARCH]
Any
Locates any rung left incomplete due to an
interruption in programming.
Locate specific instruction
[SEARCH]
[Instruction key]
(Address)
Any
Locates instruction searched for. Press [SEARCH]
to locate the next occurrence of instruction.
Locate specific word
address
[SEARCH][8]
(Address)
Any
Locates this address in the program (excluding -[]-
and - [/]- instructions and addresses in files).
Press [SEARCH] to locate the next occurrence of
this address.
Single rung display
[SEARCH]
[DISPLAY]
Any
Displays the first rung of a multiple rung display by
itself. Press key sequence again to view multiple
rungs.
Remote Mode Select:
run/program
[SEARCH]
[5][9][0]
Run/Program Places the processor in run/ program mode.
Remote test
[SEARCH]
[5][9][1]
Places the processor in remote test mode.
Remote program
[SEARCH]
[5][9][2]
Places the processor in remote program mode.