Rockwell Automation 1747-ACNR15 ControlNet Adapter Module User Manual - Manual (Page 82)

Publication 1747-UM003A-EN-P
4-54
Since the 1746-HSCE module uses 42 M0 file words for configuration, the
user must enter the configuration values under the Configuration Setting tab so
that the 1747-SCNR scanner can write the configuration values each time a
module configuration is made to the HSCE module. Below are the example
configuration values for setting up the 1746-HSCE module in basic count-only
mode. See your 1746-HSCE User Manual for more information on
configuring the module.