Rockwell Automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS PA Linking Device User Manual User Manual
Page 72

72
Rockwell Automation Publication XXXX-X.X.X - Month Year
Index
M
main page display
CNet MAC
IP
not owned
PA bus A/B
status descriptions
bus A tripped
bus B tripped
new device found
ok
redundancy err
redundancy ok
safe mode
STS (status)
STS status descriptions
maximum cable length
MultiMaster mode
config mismatch
N
network address switches
network connection, H1
network diagram
ControlNet network
EtherNet/IP network
node address, ControlNet
,
noise, avoiding
P
PA master configuration
class 2 MPPF
max scan address
PA node
slave retry
slave timeout
slew compensation
topology mode
PA master input image
bus A/B tripped
connection status
MasterMode
ModuleStatus
MultiMasterActive
NewFieldDevice
PA master page
bus A/B
bus A/B enabled
bus A/B term
bus A/B tripped
external pwr
PA node
temperature
PA network connection
PA segment
PA topology, multi-master
A bus only
not terminated at linking device
shared termination
terminated at linking device
B bus only
not terminated at linking device
shared termination
terminated at linking device
dual bus
shared termination
terminated at linking device
PA topology, single master
A bus only
not terminated at linking device
terminated at linking device
B bus only
not terminated at linking device
terminated at linking device
dual bus
not terminated at linking device
terminated at linking device
ring bus
split bus
not terminated at linking device
terminated at linking device
Page button
power
additional supplies
conditioners
connection
supply
supply connection
power supply
recommended
PROFIBUS DP layer
PROFIBUS PA cable minimum requirements
PV format options
R
redundancy
hardware
master redundancy
media redundancy
software
media redundancy
redundant
linking devices
master mode
PA code, example
PA media
requested packet interval
maximum
minimum
RPI
S
Safe mode
Safe state
segment terminators
shield ground
shielding
signal attenuation