Software installation, Aop version, Firmware revision – Rockwell Automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS PA Linking Device User Manual User Manual
Page 25: Aop version firmware revision
Rockwell Automation Publication 1788-UM058B-EN-P - September 2014
25
Installation
Chapter 1
Software Installation
You need the AOP for the Studio 5000 Logix Designer application to configure
and manage the linking device. The installation of the AOP includes the
HSProcessUtility that is used to manage DTMs and GSD service libraries.
For the latest compatible software information and to download the AOP, see the
Product Compatibility and Download Center at
http://www.rockwellautomation.com/rockwellautomation/support/
pcdc.page#/tab2
.
AOP Version
The AOP version of the linking device is shown on the display during the
start-up process.
Firmware Revision
The firmware revision is printed on the linking device and displayed on the
screen during powerup. The Web server also provides the firmware revision.
TIP
You can also click the upper-left corner of the profile window and click About
Module Profile to view the AOP version.