General precautions, Prevent electrostatic discharge – Rockwell Automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS PA Linking Device User Manual User Manual
Page 10

10
Rockwell Automation Publication 1788-UM058B-EN-P - September 2014
Preface
Built-in power conditioners and protection help to minimize installation space
requirements. The PA segment is divided between two physical ports (A and B)
with individual protection and a supply of 500 mA per port. See
.
Basic diagnostics of the linking device and field devices is found in the input
assemblies. Advanced configuration is accomplished only through the AOP.
To help you troubleshoot the linking device, a 128 x 128 pixel display provides
access to device status information. Status information includes network voltages
and currents, internal temperature, and communication quality to each field
device.
A built-in web server provides remote access to network and field device data.
General Precautions
Read and understand all precautions before using the linking device.
Prevent Electrostatic Discharge
ATTENTION: Prevent Electrostatic Discharge
This equipment is sensitive to electrostatic discharge, which can cause internal
damage and affect normal operation. Follow these guidelines when you handle
this equipment
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in use.
IMPORTANT
Do not wire more than one conductor on any single terminal.