Rockwell Automation 1608P-200A480V... HC-DySC User Manual - Manual (Page 42)

42 Rockwell Automation Publication 1608P-UM005A-EN-P - November 2014
Appendix A HC-DySC with Generator Transfer (GT) Option
Figure 31 - Home Screen GT Mode
ATS / Generator Contacts The generator transfer command dry relay contact provided by the user must be
rated for at least 24 VDC and 20 mA continuous current. User connections to
the HC-DySC are made at terminal block TB2. The location of TB2 is shown in
Figure 32 . For access to the TB2 screw terminal block, remove the I/O knockout
in the top left of the HC-DySC cabinet as shown in Figure 2 on page 9 .
Figure 32 - TB2 Location
SHOWN WITH
DOOR OPEN
TB2 LOCATION