Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 61)

Chapter 8
Special Menu
8–8
From the Special Menu use the or key to select
Option 7; Data Transfer. Press the key and the Data Transfer
display will appear as shown in Figure 8.13.
Figure 8.13
Data Transfer Display
Data
/ / /
/ / /
0 50 100
(0)%
Data Transfer
<
1 – Param File X Fr
Upload Download
To Upload the Param File, press the
F1
soft designator key.
The verification message shown in Figure 8.14 will appear.
Figure 8.14
Parameter File Upload Verification
Upload Parameter File
Are You Sure (Y/N)?
Press the
F1
designator to initiate the upload (YES), and
the
F4
key to return to the Data Transfer Display (NO).
When you press the
F1
designator the loading will occur as
shown in Fig. 8.15 . A bar chart will scroll across the bottom of the Data
Screen to indicate the percentage of the parameter table that is uploaded.
Accessing the Data Transfer
Function
Uploading