Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 14)

2
Chapter
2–1
Parameter Option
The Parameter Option provides you with access to the Drive parameter
database. Any parameter can be directly accessed by number in the Linear
Mode as shown in Figure 2.1, or any parameter can be viewed by File, Group
or Element as shown in Figure 2.2. The Element option is accessed by
pressing the Return key while the initial File/Group display is active.
Figure 2.1
(Linear Mode Initial Screen)
Param_ # Val_Base FGE_ Mode
Value : +500
Min : -1500
Max : +1500
Link : None
Clr_Flt
Linear: [ 142 ]
<
Vel Fdbk TP Low.
>
Error Filter BW
Kf Velocity Loop
Kp Velocity Loop
Par
F1 F2 F4 F3
Figure 2.2
(File/Group/Element Mode Initial Screen)
File
Parameter:
<
Group Text 1
>
Grp
Group Lin_Mode
<
File Text 1
>
File
F1 F2 F4 F3
General