Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 26)

Chapter 3
Fault & Warning Queues
3–3
To clear the Fault & Warning QUEUE without leaving a visual record, press
the
F2
soft designator. A verification request will appear
(Figure 3.4).
Figure 3.4
Clear Fault Queue Verification Message
Clear Fault Queue
Are you sure (Y/N) ?
Press
F1
soft designator for YES and
F4
soft
designator for NO. Upon successful completion of the clear, the #1 entry in
the Queue will display CLEAR FAULTS to indicate the Queue has been
cleared.
To reset the drive while in the Fault Queue, press the
F3
soft
designator. A verification message will appear as shown in Figure 3.5.
Figure 3.5
Reset Drive Verification Message
Reset the Drive
Are you sure (Y/N) ?
To return to the Main Menu, press the
ESC
key.