Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 24)

3
Chapter
3–1
Fault & Warning Queues
The Fault Queue and Warning Queue screens provide access to Fault and
Warning Information stored in the drive.
When you activate either the Fault Queue Entry Screen or the Warning
Queue Entry Screen, the four (4) most recent faults or warnings will be
displayed on the left hand side of the screen. In the case of faults, if the fault
caused the drive to trip, a TP designator will precede the fault text string.
The information box on the right hand side of the screen will provide the
fault or warning code and the time stamp of the event.
Additional information to resolve faults can be accessed by pressing the
RESOLVE key (F4 soft key) as shown in Figure
3.2 .
From the Main Menu, use the or key to place the
cursor on Option 3, Fault Queue (Figure 3.1).
Figure 3.1
Main Menu Options
ProcDspy
1 - Parameter
2 - Link Summary
3 - Fault Queueă
4 - Warning Queue
5 - EEPROM/BRAM
Help
No information
available at this
time!
F1 F2 F4 F3
> <
Introduction
Accessing the Fault Queue