Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 60)

Chapter 8
Special Menu
8–7
Continue the entry process by pressing the
F1
soft
designator and then entering number 2 in the character entry box. Enter your
desired character for position #2. Continue this sequence until you have
entered as many name characters as you wish, up to a maximum of sixteen.
When you have entered all Drive Identity name characters as you wish them
to appear, press the key. The new name will be saved and the
display will return to the Special Menu.
The Drive Identity name can also be changed by using the Char_Val option
to enter hex values for the characters in the character selection chart.
With the drive identity display selected, press the Char_Val soft designator
F2
. The dialog box shown in Figure 8.11 will appear.
Figure 8.11
ASCII (Hex) Dialog Box
Enter ASCII (Hex):< >
Min: 20 Max: 7F
Enter the value 4F with the keyboard. The ASCII equivalent of 4F which is
a capital O will appear at position one (1) of the name (Figure 8.12).
Figure 8.12
ASCII Name Entry
Data
Name:
O
$
--(Char#2)--
When you have entered all of the hex values you wish for the Drive Identity,
press the key. The ASCII name will be saved and the GPT will
return to the Special Menu display.
Changing Drive Identity
in Hex