Rockwell Automation 1336R REGEN LINE REG - Manual (Page 90)

3–38 Regenerative Brake Operation
Programming
Parameter No. 20
Display Units %
Parameter Type Read/Write
Factory Default 85% AC
BASE
➊
Min/Max Value 75/90% AC
BASE
➊
Drive Units 100 = 4096
AC Line Undervoltage Trip Level 1 (Not Enabled)
This parameter sets a software under voltage trip point that is active when the 1336 REGEN
Converter is not enabled. The 1336 REGEN Converter is factory set to prevent it from being
enabled when the input AC line voltage is less than 85% of the AC
BASE
volts.
➊ For 380VAC input Line Regeneration Packages, AC
BASE
volts = 380V.
For 460VAC input Line Regeneration Packages, AC
BASE
volts = 460V.
Important: The 1336 REGEN Converter cannot be enabled for the [LUV Trip 1] to be
changed.
Parameter No. 21
Display Units %
Parameter Type Read/Write
Factory Default 60% AC
BASE
➊
Min/Max Value 50/70% AC
BASE
➊
Drive Units 100 = 4096
AC Line Undervoltage Trip Level 2 (Enabled)
This parameter sets a second software under voltage trip point that is active when the 1336
REGEN Converter is enabled. The 1336 REGEN Converter is factory set to trip if the input AC
line voltage is less than 60% of the AC
BASE
volts.
➊ For 380VAC input Line Regeneration Packages, AC
BASE
volts = 380V.
For 460VAC input Line Regeneration Packages, AC
BASE
volts = 460V.
Important: The 1336 REGEN Converter cannot be enabled for the [LUV Trip 2] to be
changed.
Parameter No. 22
Display Units Number
Parameter Type Read/Write
Factory Default 0.1
Min/Max Value 0.0/0.3
Drive Units 1.0 = 4096
Phase Locked Loop Error Trip Point
The phase locked loop of the 1336 REGEN Line Regeneration Package synchronizes 1336
REGEN operation with the incoming power from the utility. This parameter allows the software
trip point of [
PLLReg Err Trip] to be adjusted to help avoid nuisance trips due to utility
distortion.
Important: The 1336 REGEN Converter cannot be enabled for a [PLLReg Err Trip] to be
changed
i p 1 r U V T L
5 % 2 0 8
i p 2 r U V T L
0 % 2 1 6
E r r T r i p g L L R e P
0 2 2 1 0 .