Rockwell Automation 1336R REGEN LINE REG - Manual (Page 2)

Important User
Information Solid-State equipment has operational characteristics differing from
those of electromechanical equipment. “
Safety Guidelines for the
Application, Installation and Maintenance of Solid-State Controls”
(Publication SGI-1.1) describes some important differences between
solid-state equipment and hard-wired electromechanical devices.
Because of this difference, and also because of the wide variety of uses
for solid-state equipment, all persons responsible for applying this
equipment must satisfy themselves that each intended application of
this equipment is acceptable.
In no event will Rockwell International Corporation be responsible or
liable for indirect or consequential damages resulting from the use or
application of this equipment.
The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and requirements
associated with any particular installation, Rockwell International
Corporation cannot assume responsibility or liability for actual use
based on the examples and diagrams.
No patent liability is assumed by Rockwell International Corporation
with respect to use of information, circuits, equipment, or software
described in this manual.
Reproduction of the contents of this manual, in whole or in part, without
written permission of Rockwell International Corporation is
prohibited.
Throughout this manual we use notes to make you aware of safety
considerations.
Attention statements help you to:
• identify a hazard
• avoid a hazard
• recognize the consequences
Important: Identifies information that is critical for successful
application and understanding of the product.
SCAN port is a trademark of Rockwell International Corporation.
PLC is a registered trademark of Rockwell International Corporation.
COLOR-KEYED is a registered trademark of Thomas & Betts Corporation.
ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage or economic loss.
Shock Hazard Labels may be located on or inside the
drive to alert people that dangerous voltage may be present.
!