Rockwell Automation 1391 USER MNL/DIGITAL AC SERVO DR - Manual (Page 60)

Chapter 6
Programming
6-23
Parameter 243 – Indirect Sink Parameter 1 (Indirect Sink1) *
This parameter specifies the sink parameter for Indirect Link 1. Parameters
243 and 244 define a link between two other parameters. The value of the
parameter specified by parameter 244 is written to the parameter specified
by parameter 243 once every velocity loop update.
Parameter Type: View/modify in Maintenance level
Minimum Value: 0
Maximum Value: 245
Default Value: 59
Parameter 244 – Indirect Source Parameter 1 (Indirect Sorc1) *
This parameter specifies the source parameter for Indirect Link 1.
Parameter Type: View/modify in Maintenance level
Minimum Value: 0
Maximum Value: 254
Default Value: 20
Parameter 245 – Indirect Sink Parameter 2 (Indirect Sink2) *
This parameter specifies the sink parameter for Indirect 2. Parameters 245
and 246 define a link between two other parameters. The value of the
parameter specified by parameter 246 is written to the parameter specified
by parameter 245 once every velocity loop update.
Parameter Type: View/modify in Maintenance level
Minimum Value: 0
Maximum Value: 254
Default Value: 59
Parameter 246 – Indirect Source Parameter 2 (Indirect Sorc2) *
This parameter specifies the source parameter for Indirect Link 2.
Parameter Type: View/modify in Maintenance level
Minimum Value: 0
Maximum Value: 254
Default Value: 45
Parameter 251 – Access Timeout
This parameter specifies the length of time in minutes that the display will
spend unattended before going back to the View level from a higher level.
A value of zero disables this function.
Parameter Type: View/modify in Maintenance level
Minimum Value: 0
Maximum Value: 32767
Default Value: 0