About parameter numbers, How parameters are organized, Device parameters – Rockwell Automation 20-750-CNETC PowerFlex Coaxial ControlNet Option Module User Manual
Page 100
100
Rockwell Automation Publication 750COM-UM003B-EN-P - November 2012
Appendix B
Option Module Parameters
About Parameter Numbers
Each parameter set is independently and consecutively numbered.
How Parameters Are
Organized
The
Device Parameters and Host Parameters are separately displayed in a
Numbered List
view order.
Device Parameters
Configuration Tool
Numbering Scheme
• HIM
• Connected Components Workbench software
• DriveExplorer software
• DriveExecutive software
The Device parameters and Host parameters begin with parameter
01. For example, Device Parameter 01 - [Port Number] and
Host Parameter 01 - [Net to Drv DL 01] are parameter 01 as
indicated by this manual.
• Explicit Messaging
, Using Explicit Messaging and
,
ControlNet Objects for details.
Parameter
No.
Name and Description
Details
01
[Port Number]
Displays the drive port into which the option module is installed.
Typically, this will be Port 4, 5, or 6.
Minimum:
4
Maximum:
6
Type:
Read Only
02
[DLs From Net Act]
Displays the number of controller-to-drive Datalinks that the
drive is using based on the I/O connection opened by the
controller.
Minimum:
0
Maximum:
16
Type:
Read Only
03
[DLs To Net Act]
Displays the number of drive-to-controller Datalinks that the
controller is using based on the I/O connection opened by the
controller.
Minimum:
0
Maximum:
16
Type:
Read Only
04
[Net Addr Src]
Displays the source from which the option module node address
is taken. This will be either the Node Address switches (see
), or the value of Device Parameter 05- [Net
Addr Cfg].
Values:
0 = Switches
1 = Parameters
Type:
Read Only
05
[Net Addr Cfg]
Sets the network node address for the option module when
Device Parameter 04 - [Net Addr Src] is set to ‘1’ (Parameters).
Default:
2
Minimum:
1
Maximum:
99
Type:
Read/Write
Reset Required:
Yes
06
[Net Addr Act]
Displays the actual network node address used by the option
module.
Minimum:
1
Maximum:
99
Type:
Read Only