Rockwell Automation 442L SC300 Safety Sensor User Manual - Manual (Page 57)

Rockwell Automation Publication 10000202762 Ver 00 - January 2012 55
Chapter 13 Annex
DoC
Figure 36 - EC declaration of conformity
Document Control Number: SEN-0413-A-EN 1 / 1
EC Declaration of Conformity
The undersigned, representing the manufacturer and the authorised representative established within the
Community
Rockwell Automation, Inc.
2 Executive Drive
Chelmsford, MA 01824
U.S.A. Rockwell Automation B.V.
Rivium Promenade 160
2909 LM Capelle aan den IJssel
Netherlands
Herewith declare that the Products: SC300 Safety Camera
Product identification (brand and
catalogue number/part number): Allen-Bradley / GuardMaster 442L-SAFCAM1
Product Safety Function: 442L-SAFCAM1 safety camera is a vision based protection device (VBPD).
The safety camera is a non-contact safety device and can be used in
applications up to Safety Category 3/PL d (EN ISO 13849-1), SIL2/SIL CL2
(EN 61496-1, EN 61508 and EN 62061), and Type 3 (IEC 61496-1).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with
the installation instructions contained in the product documentation:
2006/42/EC Machinery Directive
2004/108/EC EMC Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 61000-6-2:2005 Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards –
Immunity for industrial environments
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emission standard for industrial environments
EN 61496-1:2004 + A1:2008 +
AC:2010 Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
IEC TR 61496-4:2007 Safety of machinery – Electro-sensitive protective equipment - Part 4:
Particular requirements for equipment using vision based protective devices
(VBPD)
EN ISO 13849-1:2008 + AC:2009 Safety of Machinery – Safety related parts of control systems – Part 1:
General principles for design
EN 62061:2005 + AC:2010 Safety of machinery – Functional safety of safety-related electrical, electronic
and programmable electronic control systems
EN 61508 Parts 1-7:1998-2000 Functional safety of electrical/electronic/programmable electronic safety-
related systems
Conformance of a type sample with the regulations from the EC Machinery Directive has been certified by:
IFA Institut fürArbeitsschutz
der Deutschen Gesetzlichen Unfallversicherung
53757 Sankt Augustin, Germany
EC Type Examination
Registration No: IFA 1101217
Report No: 2011 24124
Manufacturer: Authorised Representative in the Community:
Signature Signature
Name: Daniel L. Nachtigall Name: Viktor Schiffer
Position: Supv – Product Certification Engineering Position: Engineering Manager
Date: 28-Dec-2011 Date: 13-Jan-2012