Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 40)

4-8 Configuring the Interbus Scanner
11. When complete, the representation area will look as shown in Figure
4.10 .
Figure 4.10 Example Interbus CMD Project
12. From the pull-down menu select Configuration/Configuration
Frame/Read In and answer Yes to changing the operating state to
Configuration Online. If there are additional prompts, answer OK or
Yes to perform the read anyway. CMD will then read the bus
configuration. (See
Figure 4.11 .)
Figure 4.11 CMD Bus Configuration
20COMM-UM007A-EN-P.book Page 8 Tuesday, January 22, 2002 10:52 AM