Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 24)

3-2 Configuring the Adapter
If your drive has either an LED or LCD HIM (Human Interface Module),
access parameters in the adapter as follows:
Using an LED HIM
Using an LCD HIM
Using the PowerFlex HIM
Step Key(s) Example Screens
1. Press the ALT and then Sel
(Device) to display the Device
Screen.
2. Press the Up Arrow or Down
Arrow to scroll to the Interbus
adapter. Letters represent files in
the drive, and numbers represent
ports. The adapter is usually
connected to port 5.
3. Press the Enter key to enter your
selection. A parameter database
is constructed, and then the first
parameter is displayed.
4. Edit the parameters using the
same techniques that you use to
edit drive parameters.
Step Key(s) Example Screens
1. In the main menu, press the Up
Arrow or Down Arrow to scroll to
Device Select.
2. Press Enter to enter your
selection.
3. Press the Up Arrow or Down
Arrow to scroll to the Interbus
(20-COMM-I) adapter.
4. Press Enter to select the
Interbus adapter. A parameter
database is constructed, and
then the main menu for the
adapter is displayed.
5. Edit the parameters using the
same techniques that you use to
edit drive parameters.
ALT
Device
OR
Sel
O R
O R
F-> Stopped Auto
0.00 Hz
Main Menu:
Diagnostics
Parameter
Device Select
Port 5 Device
20-COMM-I
Main Menu:
Diagnostics
Parameter
Device Select
20COMM-UM007A-EN-P.book Page 2 Tuesday, January 22, 2002 10:52 AM