Rockwell Automation 22-SCM-232 Serial Converter Module - Manual (Page 12)

1-4 Getting Started
Please read the following safety precautions carefully.
Safety Precautions
!
ATTENTION: Risk of injury or equipment damage exists. Only
personnel familiar with drive and power products and the associated
machinery should plan or implement the installation, start-up,
configuration, and subsequent maintenance of the product using the
serial converter module. Failure to comply may result in injury and/or
equipment damage.
!
ATTENTION: Risk of injury or equipment damage exists. If the serial
converter module is transmitting control I/O to the drive (indicated by a
solid green diamond LED), the drive may fault when you remove or
reset the serial converter module. Determine how your drive will
respond before removing or resetting a connected serial converter
module.
!
ATTENTION: Risk of injury or equipment damage exists.
Parameter 04 - [Comm Flt Action] lets you determine the action of
the serial converter module and connected drive if DF1 serial
communications are disrupted. By default, this parameter faults the
drive. You can set this parameter so that the drive continues to run.
Precautions should be taken to ensure that the setting of this parameter
does not create a hazard of injury or equipment damage.