Ce conformity, Low voltage directive (73/23/eec), Emc directive (89/336/eec) – Rockwell Automation 20L-LL PowerFlex 700L Liquid-to-Liquid Heat Exchanger User Manual
Page 26: Pressure equipment directive (97/23/ec), Essential requirements for ce compliance, C-tick conformity, Ce conformity -16, C-tick conformity -16
1-16
Installation
PowerFlex 700L Liquid-to-Liquid Heat Exchanger User Manual
CE Conformity
Compliance with the Low Voltage (LV) Directive and Electromagnetic
Compatibility Directive (EMC) has been demonstrated using harmonized
European Norm (EN) standards published in the Official Journal of the
European Communities. PowerFlex 700L Liquid-to-Liquid Heat Exchangers
comply with the EN standards listed below when installed according to this
PowerFlex 700L Liquid-to-Liquid Heat Exchanger User Manual.
CE Declarations of Conformity are available online at:
Low Voltage Directive (73/23/EEC)
• EN 60204-1 Safety of Machinery – Electrical equipment of machines –
Part 1: General requirements
EMC Directive (89/336/EEC)
• EN 61000-6-2 Electromagnetic Compatibility (EMC) – Generic
standards– Immunity for industrial environments
• EN 61000-6-4 Electromagnetic Compatibility (EMC) – Generic
standards – Emission standard of industrial environments
Pressure Equipment Directive (97/23/EC)
• The PowerFlex 700L Liquid-to-Liquid Heat Exchanger falls below the
limits for applicability of this directive. Good engineering practice has
been used in the design and manufacturing.
Essential Requirements for CE Compliance
Conditions 1 and 2 listed below must be satisfied for PowerFlex 700L
Liquid-to-Liquid Heat Exchangers to meet the requirements of EN 60204-1
and EN 61000-6-4:
1. Review important precautions/attention statements throughout this
manual before installing the heat exchanger.
2. System earthing (grounding) as described on
.
C-Tick Conformity
Compliance of PowerFlex 700L Liquid-to-Liquid Heat Exchangers with the
Australian Radiocommunications Act of 1992 has been demonstrated
through compliance with IEC 61000-6-4. The Essential Requirements for
CE Compliance provided above apply to C-Tick compliance for PowerFlex
700L Liquid-to-Liquid Heat Exchangers.
C-Tick Declarations of Conformity are available online at: