Weidmuller WI-MOD-945-E: 900Mhz Wireless Ethernet & Device Server v2.16 - Manual (Page 35)

Weidmuller Wireless Ethernet Modem & Device Server WI-MOD-945-E User Manual
Page 35 www.weidmuller.com Rev 2.136
For optimal security consider using a passphrase consisting of a combination of letters and numbers (i.e. not just a simple
word or phrase) as well as upper and lower case. E.g. “WiReLeSs TeChNoLoGy 2010”
WPA Enterprise - Authenticator (AP) Configuration
RADIUS Server IP Address/Port/shared secret:
Connection information for the RADIUS Authentication
Server.
Supplicant Re-authenticate Period:
Sets the maximum time at which the Supplicant must re-
authenticate. This parameter determines maximum time a
client will still have access to the network after its user
credentials have been revoked.
Enable Debug:
Must only be used during commissioning and only if requested by WEIDMULLER Support. This must be disabled for
normal operation.
WPA Enterprise - Supplicant (Client)
Configuration
Username / Password:
User credentials that match a valid user on the RADIUS
server.
Enable Debug:
Disabled for normal operation. Enables debug mode for use
during commissioning. To be used only if requested by
WEIDMULLER Support.
Trusted CA certificate upload
Upload the certificate of the issuer of the RADIUS server’s certificate. This enables the Supplicant to verify the identity of
the RADIUS server during the authentication process.
Supported EAP method - PEAP / MSCHAPv2
Certificate Verification result:
Once a certificate has been loaded, this text box will contain validation information for the certificate. If this text is blank or
contains errors, the certificate is invalid.
Trusted CA Certificate Contents:
.Displays the contents of the loaded certificate
Figure 20 - WPA Enterprise Authenticator
Figure 21 - WPA Enterprise Supplicant