Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 95)

UPC-E Enter/Exit Programming Mode
Product Reference Guide 85
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E barcode data.
$CEBCT00(CR)
UPC-E Check Character Transmission = Don’t Send
$CEBCT01(CR)
UPC-E Check Character Transmission = Send
DEFAULT
UPC-E 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label for this symbology is decoded.
DEFAULT
$CEB2D00(CR)
UPC-E 2D Component =
Disable (2D component not required)
$CEB2D01(CR)
UPC-E 2D Component =
2D component must be decoded