Aztec code set length 2, Default – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 186
Enter/Exit Programming Mode
Aztec Code
176
WDI4600
Aztec Code Set Length 2
This feature specifies one of the barcode lengths for
. Length 2 is the
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length
Mode. Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad with
zeroes).
See
for detailed instructions on setting this feature.
$CAZL2
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 3,832 Characters