Ack nak error handling, Indicate transmission failure, Ack nak e – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 39: Rror, Andling, Ndicate, Ransmission, Ailure, Default
RS-232/USB-Com Interfaces
Enter/Exit Programming Mode
Product Reference Guide
29
ACK NAK Error Handling
This feature specifies the method the reader uses to handle receive errors detected while waiting
for an ACK character from the host.
DEFAULT
$CR2EH00(CR)
ACK NAK Error Handling = Ignore Errors Detected
$CR2EH01(CR)
ACK NAK Error Handling = Process Error as Valid ACK
Character
$CR2EH02(CR)
ACK NAK Error Handling = Process Error as
Valid NAK Character
Indicate Transmission Failure
This option enables/disables the reader’s ability to sound an error beep to indicate a
transmission failure while in ACK/NAK mode
$CR2TF00(CR)
Indicate Transmission Failure = Disable Indication
$CR2TF01(CR)
Indicate Transmission Failure = Enable Indication
DEFAULT
.