Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 175)

MSI Enter/Exit Programming Mode
Product Reference Guide 165
MSI Set Length 1
This feature specifies one of the barcode lengths for MSI Length Control . Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed
Length Mode. Length includes the barcode’s data characters only. The length can be set
from 01 to 50 characters.
Table 21 provides some examples for setting Length 1. See page 217 for detailed instructions on
setting this feature.
Table 21. MSI Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CMSL1
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning. ~
CANCEL
DEFAULT 01 = Length 1 is 1 Character