Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 75)

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 65
SCANNING FEATURES
Scan Mode
Selects the reader’s scan operating mode. See page 228 in “References” for descriptions.
$CSNRM00(CR)
Scan Mode = Trigger Single
DEFAULT
$CSNRM01(CR)
Scan Mode = Trigger Hold Multiple
$CSNRM02(CR)
Scan Mode = Trigger Pulse Multiple
$CSN-
Scan Mode = Flashing
$CSNRM04(CR)
Scan Mode = Always On
$CSN-
Scan Mode = Stand Mode
Options concerning Stand Mode behavior are available at the following
feature,
Stand Operation .