Green spot duration, Mobile phone mode, Green spot duration mobile phone mode – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 83: Default
Reading Parameters
Enter/Exit Programming Mode
Product Reference Guide
73
Green Spot Duration
Specifies the duration of the good read pointer beam after a good read.
$CLSSP00(CR)
Green Spot Duration = Disable (Green Spot is Off )
$CLSSP01(CR)
Green Spot Duration = Short (300 msec)
DEFAULT
$CLSSP02(CR)
Green Spot Duration = Medium (500 msec)
$CLSSP03(CR)
Green Spot Duration = Long (800 msec)
Mobile Phone Mode
This mode is useful for scanning barcodes displayed on a mobile phone.
$CSNPE00(CR)
Mobile Phone Mode = Disable
$CSNPE01(CR)
Mobile Phone Mode = Enable
DEFAULT