Pick mode, Stand mode sensitivity, Pick mode stand mode sensitivity – Wasp Barcode WDI4600 2D Product Reference Guide User Manual

Page 78: Default

Text mode
Original mode

Enter/Exit Programming Mode

Reading Parameters

WDI4600

Pick Mode

Specifies the ability of the reader to decode labels only when they are close to the center of the
aiming pattern. This allows the reader to accurately target labels when they are placed close
together, such as on a pick sheet.

This feature is not compatible with Multiple Labels Reading in a Volume.

DEFAULT

$CSNPM00(CR)

Pick Mode = Disable

$CSNPM01(CR)

Pick Mode = Enable

Stand Mode Sensitivity

Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.

$CSMSE00(CR)

Stand Mode Sensitivity = Low

$CSMSE01(CR)

Stand Mode Sensitivity = Medium

DEFAULT

$CSMSE02(CR)

Stand Mode Sensitivity = High