Pdf417 set length 1, Default – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 197
PDF417
Enter/Exit Programming Mode
Product Reference Guide
187
PDF417 Set Length 1
Specifies one of the barcode lengths for
. Length 1 is the minimum
label length if in
Variable Length
Mode, or the first fixed length if in Fixed Length Mode.
Length includes the barcode’s data characters only. Characters can be set from 0001 to 2,710
characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be
considered to be 2,710.
See
for detailed instructions on setting this feature.
$CP4L1
Select PDF417 Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character