Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 213)

Product Reference Guide 203
MOTION FEATURES
M OTION A IMING C ONTROL on page 203
M OTION S ENSITIVITY on page 204
M OTIONLESS T IMEOUT on page 204
Use this chapter to configure motion settings for the handheld.
Reference Appendix B for a listing of standard factory settings.
Motion Aiming Control
Configures the ability of the scanner to Enable/Disable the Aiming system when motion is
detected.
$CMOMD00(CR)
Motion Aiming Control = Disable
$CMOMD01(CR)
Motion Aiming Control = Enable
DEFAULT