Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 84)

Enter/Exit Programming Mode Reading Parameters
74 WDI4600
Partial Label Reading Control
Enable/Disable to ignore partial labels to be read within the boundary of the field of view.
IPPL00
Partial Label Reading Control = Disable
IPPL01
Partial Label Reading Control = Enable
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature is
enabled, you will be unable to read normally-printed labels or programming labels in this
manual. Scan the “Disable” barcode below to return the scanner to its default for this feature.
To set decoding for only 2D codes, go to
2D Normal/Inverse Symbol Control" on page 173 .
CAUTION
$P,CIPVR00,P(CR)
Decode Negative Image = Disable
DEFAULT
$P,CIPVR01,P(CR)
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other programming
labels in this manual.
Unlike some programming features and options, Decode Negative Image selec-
tions require that you scan only one programming barcode label. DO NOT scan
an ENTER/EXIT barcode prior to scanning a Decode Negative Image barcode.