Data matrix set length 2, Default – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 192
Enter/Exit Programming Mode
Data Matrix
182
WDI4600
Data Matrix Set Length 2
This feature specifies one of the barcode lengths for
. Length 2 is
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Characters can be set from 0001 to 3,116 characters in increments of 0001 (pad
with zeroes).
See
for detailed instructions on setting this feature.
$CDML2
Select Data Matrix Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 3,116 Characters