Stand mode indication, Default – Wasp Barcode WDI4600 2D Product Reference Guide User Manual

Page 76

Text mode
Original mode

Enter/Exit Programming Mode

Reading Parameters

WDI4600

Stand Mode Indication

This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue
indicator will blink when Stand Mode scanning is active. If reader detects motion and switches
out of Stand Mode into Triggered Mode, blinking will stop until Stand Mode is active again.

DEFAULT

$CSMFL00(CR)

Stand Mode Indication = Disable

$CSMFL01(CR)

Stand Mode Indication = Enable