Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 158)

Enter/Exit Programming Mode Code 11
148 WDI4600
Code 11 Set Length 1
This feature specifies one of the barcode lengths for Code 11 Length Control . Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length
Mode. Length includes the barcode’s check and data characters. The length can be set from 2 to
50 characters.
Table 15 provides some examples for setting Length 1. See page 217 for detailed instructions on
setting this feature.
Table 15. Code 11 Length 1 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeroes)
02 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning. ~
CANCEL
DEFAULT 04 = Length 1 is 4 Characters