Sensaphone 1800 - Manual (Page 97)

Chapter 7: Operation
95
Below is an example of what the 1800 might say during a typical
“voice” dialout:
“Hello, this is 555-2278, ‘Acme Warehouse at 3rd and Chestnut
Streets,’ Zone One, ‘Temperature in refrigerator one,’ alarm exists,
temperature too high, it is now 45 degrees F.”
“Hello, this is 555-2278, ‘Acme Warehouse at 3rd and Chestnut
Streets,’ Zone One, ‘Temperature in refrigerator one,’ alarm exists,
temperature too high, it is now 45 degrees F.”
“Hello, this is 555-2278, ‘Acme Warehouse at 3rd and Chestnut
Streets,’ Zone One, ‘Temperature in refrigerator one,’ alarm exists,
temperature too high, it is now 45 degrees F.”
“Enter acknowledgment code.”
In this example, the number of Voice Message Repetitions was set
to three.
NOTE: If the call reaches an answering machine,
the message will be recorded, but the 1800 will be
talking over your outgoing message, so you will
probably lose part of the first alarm message repeti-
tion.
Alarm Dialout—Pager
When dialing out to a destination programmed as “Numeric Pager,”
the 1800 leaves its programmed ID number on the display of a
numeric pager along with the zone number(s) in alarm.
IMPORTANT: When dialing out to a phone number programmed as
“Numeric Pager,”
the 1800 DOES NOT speak a voice message. It
calls the pager company or service, enters the number to be displayed
on the beeper, then hangs up.
Alarm Dialout—Alphanumeric Pager
When dialing out to a destination programmed as “Alphanumeric
Pager,” the 1800 leaves a text message up to 160 characters long on
the display of an alphanumeric pager or wireless phone.
IMPORTANT: When dialing out to a phone number programmed as
“Alphanumeric Pager,” the 1800 DOES NOT speak a voice message.
It calls the pager company or service, transmits the information to be
displayed on the pager, then hangs up.