Sensaphone 1800 User Manual

Page 93

Chapter 6: Controlling the Output

Mode 6

: Output on when zone 6 goes into alarm. Off when alarm

is acknowledged.

Mode 7

: Output on when zone 7 goes into alarm. Off when alarm

is acknowledged.

Mode 8

: Output on when zone 8 goes into alarm. Off when alarm

is acknowledged.

Mode 9

: Output on when a Sound alarm occurs. Off when alarm is

acknowledged.

Mode 0

: Output on when a Power alarm occurs. Off when alarm is

acknowledged.

Mode 10

: Output on when any alarm occurs. Off when all alarms

are acknowledged.

MANUAL MODE

Mode 11

: Output controlled manually via keypad command or

touch-tone telephone.

When programmed for Manual mode, the command to switch the
output is:

SENSOR ON/OFF + OUTPUT.

The 1800 will respond “ON” or “OFF” to indicate the state of the
output.

Note: If the 1800 says nothing, the output is not

programmed for manual mode.

To program the Output Mode:

1. Press the SET key.

2. Press the OUTPUT key.