Sensaphone 1800 - Manual (Page 38)

Sensaphone 1800 Manual
36
ENABLE/DISABLE POWER
This function allows you to enable or disable AC power failure
monitoring (0). Enabled AC power monitoring will respond to an
alarm and allow dialout. Disabled AC power monitoring will not
initiate a dialout status report. The default setting is enabled (on).
To enable/disable power:
1. Press the SENSOR ON/OFF key.
2. Press the power key (0) to enable/disable. 1800 will say “Off”
to indicate disabled or “On” to indicate enabled.
3. Repeat the steps to change.