Sensaphone 1800 - Manual (Page 128)

Sensaphone 1800 Manual
126
On or Off Default=Enabled (on)
Power Alarm Enable/Disable Turns power alarm detection on or off
[SENSOR ON/OFF] + [POWER]
On or Off Default=Enabled (on)
Sound Alarm Enable/Disable Turns high sound level alarm detection on or off
[SENSOR ON/OFF] + [SOUND]
On or Off Default=Enabled (on)
Temperature Scale Selects between Fahrenheit and Celsius
[SENSOR ON/OFF] + [TEST/°F/°C]
On or Off Default=Fahrenheit (on)
Temperature-Only Status A limited status report that only includes inputs
Report configured as temperature .
[WHAT IS] + [TEST]
Designating a Zone Unused Removes zone from status and alarm reports
[SENSOR ON/OFF] + [SET] + [zone #]
On or Off Default=on
Special Functions
Dial-Out Test Mode Simulates alarm to test telephone programming
[SET] + [TEST] + [# key 1–8] + [ENTER]
Default=none
Listen-In Time Length of listen-in time during call-in status report
[SET] or [WHAT IS] + [LISTEN TIME]
Min: 0 sec, Max: 255 sec Default=00:00 (min:sec)
Acknowledgment Code To create an individual user’s 4-digit acknowledgment code
[SET] + [CODE] + [# key 1–8]
Default=1234 for user 1, no default for users 2–8
Date & Time Internal clock/calendar
[SET] or [WHAT IS] + [DATE/TIME/#]
Date: mmddyy, Time: hhmm Default=none
Alarm History Recites last 10 alarms
[WHAT IS] + [HISTORY]
Default=n/a
Reset History Clears the alarm history
[SET] + [HISTORY]
Default=n/a
Switch Output Turns output relay on or off (in manual mode)
[SENSOR ON/OFF] + [OUTPUT]
On or Off Default=off