beautypg.com

Sensaphone 1800 User Manual

Page 100

background image

Sensaphone

1800 Manual

98

TIP: When the 1800 is programmed to make calls to pagers,
make sure the intercall delay time is long enough to give the
person carrying the pager some time to get to a phone to call
the unit back.

Alarm Acknowledgment—Alphanumeric Pager Dialout

The 1800 will dial out to your alphanumeric pager service and
leave a message on the display of your pager. (See Programming
Section, Chapter Five, for dialing to beepers/pagers).
The unit
will then hang up without speaking a voice message and wait for
you to call back and enter an acknowledgment code. This waiting
period is called the “intercall delay time.” During this time you
may call the unit back from a Touch-Tone phone to receive a report
of the alarm condition and acknowledge the alarm by entering an
acknowledgment code.

NOTE: An alarm cannot be acknowledged using

a pulse (rotary) telephone unless the Callback

Acknowledgment feature is enabled.

Below is an example of what the 1800 will say when you call it
back to acknowledge a typical alarm:

“Hello, this is 555-2278, ‘Acme Warehouse at 3rd and Chestnut
Streets,’ Zone One, ‘Temperature in refrigerator one,’ alarm exists,
temperature too high, it is now 45 degrees F.”

“Enter acknowledgment code.”

The 1800 will now wait 10 seconds for a Touch-Tone
acknowledgment code to be entered. After the last digit of the
acknowledgment code has been received, the 1800 will respond by
saying, “Alarm Acknowledged.” The alarm has been acknowledged
and the unit will hang up. Once the alarm has been acknowledged,
the dialout process stops.

If a Touch-Tone acknowledgment code is not received, the 1800
will respond by saying: “beep,” “error,” “goodbye.” The alarm
has not been acknowledged. The 1800 will hang up and wait for
you to call back and enter an acknowledgment code. This waiting
period is called the “intercall delay time.” During this time you
may call the unit back from a Touch-Tone phone and the unit will
give a voice report. Once you receive the complete report, enter