Sensaphone 1800 - Manual (Page 36)

Sensaphone 1800 Manual
34
ENABLE/DISABLE ZONE ALARMS
This function allows you to enable or disable a Zone (1-8) for
dialout during an alarm. An enabled Zone will respond to an alarm
and allow dialout. A disabled Zone will not initiate a dialout, but
it will still be included in the status report, preceded by the word
“off.” This command is useful while you are wiring your Zones
or at any other time you would like the alarms to be ignored. The
default setting for all Zones is enabled (on).
To enable/disable Zones:
1. Press the SENSOR ON/OFF key.
2. Press the corresponding number key (1-8) of the Zone you want
to enable/disable. 1800 will say “Off” to indicate disabled or
“On” to indicate enabled.
3. Repeat key sequence to change.