RKI Instruments Eagle 2 - Manual (Page 5)

Introduction • 1
Introduction
Using an advanced detection system consisting of up to six gas
sensors, the Eagle 2 Gas Monitor detects the presence of
combustible gases, oxygen (O
2
), carbon monoxide (CO),
hydrogen sulfide (H
2
S), and 2 other gases simultaneously. The
Eagle 2’s compact size and easy-to-use design make it ideally
suited for a wide range of applications as described in the Eagle
2 Operator’s Manual. Please read the Eagle 2 Operator’s
Manual first before using the Eagle 2 Data Logger Management
Program.
The Eagle 2 Data Logger Management Program downloads
stored data in the Eagle 2 to a Windows-based PC. After the
data has been downloaded, you can view, save, or print it using
your computer and the Eagle 2 Data Logger Management
Program.
The purpose of this manual is to explain how to use and set up
the Eagle 2 Data Logger Management Program. You will learn
how to:
• install and launch the program
• install the downloading cable (if needed)
• download data from the Eagle 2
• view, print, and save data
• change data logging parameters
• perform a calibration
• change the appearance of the program screens
• change the color of graphed readings for a particular gas
Before you get started, be sure to review the system
requirements in the next section.