RKI Instruments Eagle 2 - Manual (Page 10)

6 • IrDA Downloading Cable
Windows
®
Wireless Link Operation Note
When using an IrDA adapter cable and the Eagle 2 Data Logger
Management Program on a Windows
®
computer, it is necessary
to make a special setting in the Wireless Link Configuration
window for proper communication between the Eagle 2 and the
Eagle 2 Data Logger Management Program. This must be done
before attempting to use the program. Follow these steps to
make this setting:
1. Click Start on the Windows
®
Icon Tray.
2. If Control Panel is available to select in the Start menu,
select it. The Control Panel will appear.
If Control Panel is not selectable in the Start menu but
Settings is, select Settings, then select Control Panel. The
Control Panel will appear.
3. Double click on Wireless Link. The Wireless Link
Configuration Window will appear.
4. Click on the Image Transfer tab.
5. Deselect the selection box for “Use Wireless Link to transfer
images from a digital camera to your computer.”