Multiquip WRS5200DFPU (KUBOTA WG972-GL-E3 DUAL FUEL) - Manual (Page 42)

page 42 — wrs5200dfpu hYdrauLIC roLLer sCreed • operatIon manuaL — rev. #0 (08/18/14)
roller screeD assembly
task 9: hydraulic hoses
There are four hydraulic hoses that need to be routed from
the stack and speed control valves at the operator's end of
the screed to the drive tube motors (power unit end) and
power unit.
Route the hydraulic hoses as shown in (Figure 24).
Figure 24. Hydraulic Hose Routing