Memmert IFP 400 - 800 Incubators (Generation 2003) - Manual (Page 39)

PERFECT
Muster
page 39
Note:
The programme remains stored on the Memory Card XL after the card has been removed from the unit. It
can however be overwritten at any time by the PC using “Celsius”.
Details on programming the MEMoryCard XL with PC and „Celsius“ can be found in
the „Celsius“ Operating Manual and in the Online Help.
18.4 Documentation on memory card MEMoryCard XL
The actual temperatures can be documented continuously on the memory card while the programme is
running from the chip card. After the programme has been completed they can be read and printed using
“Celsius”. The operation is described in the “Celsius” Operating Manual.
A certain amount of storage space is provided for documentation depending on the programme duration.
The sampling rate is set automatically by the controller depending on the programme duration.
With a programme duration up to 270 hours the documentation of the actual values on the MEMoryCard
XL takes place with a 1-minute cycle. With programmes of longer duration the sampling time is extended
up to 30 min max.
Documentation is started afresh on each programme start; the old report data are overwritten.