Memmert IFP 400 - 800 Incubators (Generation 2003) - Manual (Page 11)

PERFECT
Muster
set
off
on push card
4
3
2
1
STERI DEFRO
rh
mb
% CO
mb
2
IN 1 IN 2 OUT IN 1 IN 2 OUT
PRINT SETUP
loop
t3
t4 t2
t1
on
off
Mo Tu We Th Fr Sa Su
°C °C
MIN
AUTO
MAX
h
page 11
5.2 Controls and indications
5.3 Switching on
The oven is switched on by pressing the push/turn control.
Oven switched off. The push/turn control is pushed
in and protected against damage. Oven switched on and can be operated using the
push/turn control and the SET key.
5.4 Setting the temperature
Hold down the SET key and set the temperature setpoint with the push/turn control.
After the SET key has been released the display briefly flashes the temperature setpoint. The display then
changes to the actual current temperature and the controller starts to control to the selected temperature
setpoint.
push/turn control
(main switch)
SET key chip card reader
temperature
display
operating
mode indication
time
display
alarm indication
fan indication
heating
monitor temperature
indication
air valve indication text display
Ill.: UFP500 Ill.: UFP500