Memmert IFP 400 - 800 Incubators (Generation 2003) - Manual (Page 33)

PERFECT
Muster
h
˚C ˚C
h
˚C ˚C
h
˚C ˚C
page 33
Note:
If all calibration corrections are set to 0.0°C the factory calibration is restored.
Calibration correction
Range –4.9°C to +4.9°C
Calibration temperature
Range down to 10°C below
CAL2
Calibration point 1
Calibration correction
Range –4.9°C to +4.9°C
Calibration temperature
Range 10°C above CAL1 to
10°C below CAL3
Calibration point 2
Calibration correction
Range –4.9°C to +4.9°C
Calibration temperature Range
10°C above CAL2 up to nominal
temperature
Calibration point 3