Memmert IFP 400 - 800 Incubators (Generation 2003) - Manual (Page 13)

PERFECT
Muster
page 13
8 Normal operation
PRINT SETUP
In this operating mode the oven operates continuously. The settings for operating the oven can be selected.
The settings act directly on the operation of the oven.
MIN
MAX
AUTO
°C
By rotating the push/turn control the following parameters can be selected and can be altered as described
in the
Section „Setting the parameters“ :
Temperature setpoint
Range: 20 °C up to nominal temperature
(details see label)
˚C
Fan speed
Range: 0 to 100%
in 10% steps.
Air valve
Range: 0 to 100%
in 10% steps.
Temperature monitor
Adjustment range: MIN MAX AUTO
(see Section “Temperature monitor“)
MIN
MAX
AUTO
°C