Memmert TTC 256 Temperature test chamber (Generation 2003) - Manual (Page 46)

46
Advanced functions
7. Advanced functions
7.1 Printer
The test chamber is equipped with a parallel printer port as standard, just as used in comput-
ers.
A standard PCL3-compatible inkjet printer which has a parallel port interface (e.g. HP DeskJet
5550 or HP DeskJet 9xx) can be connected to the printer port on the left of the test chamber
(see page 11 ).
Make sure that a shielded interface cable is used. The shielding must be connected to the plug
casing.
The controller has an internal log memory (see page 57 ). The log data can be printed out in
this mode via the connected printer.
If a colour printer is connected, the various graphs are printed out in colour.
For a printout, the GLP header is also printed automatically, and contains the following details:
► Date of printout
► Period of logging
► Consecutive page numbers
► Serial numbers and appliance name
By turning the push-turn control and holding down the SET key, the following parameters can
be selected and altered one after another, as described in Chapter 5.6.3 Basic operation on
page 29 :
Querying the date of the first print page
Querying the date of the last print page
Start graphical printout
Print programme and configuration page
Leaving the print menu and returning to the main
menu
7.2 Basic appliance settings ( Setup)
In this operating mode, the basic settings for the
appliance can be made.
By turning the push-turn control and holding
down the SET key, the following parameters can be selected and altered, as described in
Chapter 5.6.3 Basic operation on page 29 :
Clock time in 24 hr. format
Conversion to summer time is not automatic, but must
be done manually
PRINT SETUP