Memmert TTC 256 Temperature test chamber (Generation 2003) - Manual (Page 3)

3
About this manual
About this manual
Purpose and target group
This manual describes the setup, function, transport, operation and maintenance of tempera-
ture test chambers of the type TTC 256 and climatic test chambers of the type CTC 256. It is
intended for use by the trained staff of the operator who are in charge of operating and / or
maintaining the test chamber.
If you as the operator are asked to work on the test chamber, you should read this manual
carefully before starting work on the unit. Familiarise yourself with the safety regulations. Only
perform the work that is described in this manual.
If there is something you don‘t understand, or certain information is missing, ask your supe-
rior or get in touch with the manufacturer. Do not do anything without authorisation.
The descriptions in this manual concerning the humidity/climatic processes refer to the
CTC climatic test chambers. TTC temperature test chambers have no humidity controller,
so that the corresponding sections of this manual are not relevant for these device types.
Other documents to observe:
► for service and repair work (see page 64 ): the separate service manual
► for controlling the test chamber with the Memmert-PC software “Celsius“ (see page 43 )
the separate manual “Celsius”
► Calibration documents; which can be found in the document compartment in the water
tank drawer (see page 10 )
Storage and Forwarding
This instruction manual belongs with the test chamber and should always be stored so that
those persons who work on the test chamber have access to it. It is the responsibility of the
operator to ensure that persons who are working on or who will work on the test chamber
are informed as to the whereabouts of this instruction manual. We recommend that it is
always stored in a protected location close to the test chamber.
Make sure that the instruction manual is not damaged by heat or damp.
If the test chamber is sold on or transported and then set up again at a different location, this
instruction manual must also go with it.