Memmert TTC 256 Temperature test chamber (Generation 2003) - Manual (Page 19)

19
Delivery, Transport and Setting Up
3. Delivery, Transport and Setting Up
3.1 Safety Regulations
Warning!
You may get your hands or feet squashed when transporting
and installing the test chamber. Wear protective gloves and
work shoes.
Warning!
Because of the weight of the chamber, you could get injured if you
try to lift it. Transport the test chamber only with a fork-lift truck,
manual pallet jack or on its castors. The transport means used must
be designed to carry the weight of the test rig (see chapter 2.9 Tech-
nical data on page 17 ). The test chamber may only be moved using a
means of transport by persons who have the required qualification
for this (e.g. fork-lift licence).
The test rig may not be transported with a crane.
Warning!
The test chamber could fall over and seriously injure you. Never tilt
the test chamber and transport it only in an upright position. This
will also prevent oil from running out of the cooling unit and into
the refrigerant circuit. The weight of the test chamber is divided
asymmetrically, since the refrigeration unit is located on the left
side.
3.2 Delivery
The test chamber can be packaged in a cardboard or other box, and is delivered on a wooden
pallet.
3.2.1 Unpacking
Remove cardboard packaging by pulling upwards or cutting carefully along an edge. Unscrew
wooden crate and remove. Raise climate chamber from the wooden pallet using a fork-lift
truck or manual pallet jack and set down on the castors of the appliance.
3.2.2 Checking for completeness and transport damage
► Check the delivery note to ensure that the delivery is complete.
► Check the test chamber for damage, fluid leaking, etc.
If you notice deviations from the delivery note, damage or irregularities, do not put the test
chamber into operation, but inform the haulage company and the manufacturer.
3.2.3 Disposing of packaging material
Dispose of the packaging material (cardboard, wood) in accordance with the appropriate
regulations for the material in your country.
3.3 Storage after delivery
If the test chamber is first to be stored after delivery: Read the storage conditions from page
65 .